Industry News

  • Types and uses of brass fittings

    21-06-2022

    Most systems that carry alkaline fluids choose brass, a ductile, attractive metal that is machinable and corrosion-resistant. Brass contains copper, zinc, and chromium to make it rust-resistant, and the lead in brass makes it machinable. The combination of copper, zinc and aluminum makes it malleabl...

  • Structural difference between gate valve and ball valve

    16-05-2022

    What are the differences between a stainless steel ball valve and a stainless steel gate valve? According to the shape, we can see that the opening and closing part of the stainless steel gate valve is a plate, while the stainless steel ball valve is a ball. The valve plate and valve core of the sta...

  • What should be paid attention to in the maintenance process of pneumatic ball valve

    16-05-2022

    Pneumatic ball valves often need to be kept clean and tidy during use, and the transmission threads also need to be lubricated regularly. If a fault is found, it must be stopped immediately before use, and the fault can be eliminated after the cause is identified. So what details should be paid atte...

  • What methods can be used to solve the problem that the regulating valve is not strictly closed

    16-05-2022

    Pneumatic control valves are widely used in petrochemical, power plants, iron and steel metallurgy, food processing, and water treatment industries, especially in large enterprises that require automatic control. The electric valve also creates conditions for the remote control of the valve, thus re...

  • What are the classifications of gas valves

    16-05-2022

    Gas valves have a wide range of uses, a wide variety, and a variety of classification methods. In general, it can be divided into two categories:The first type of automatic valve: is a valve that operates by itself depending on the ability of the gas itself. Such as check valve, regulating valve, pr...

  • What are the standards and specifications for valve pressure testing

    16-05-2022

    The standards and specifications for valve pressure testing are as follows: 1. Under normal circumstances, the valve is not subjected to a strength test, but the valve body and bonnet or valve body and bonnet damaged by corrosion should be subjected to a strength test after repair. For the safety va...